Utilities#
addCTnoise#
function proj=addCTnoise(proj, varargin)
ADDCTNOISE adds realistic noise to CT projections
addCTnoise(PROJ): adds Poisson and Gaussian noise to the input data.
addCTnoise(PROJ,OPTS,VAL,..): adds noise with OPT options.
Possible options are :
'Poisson' : changes the average photon count for Poisson noise. Default
value is 1e5
'Gaussian': changes the mean and standard deviation of the electronic
Gaussian noise. Default value is [0 0.5]
The computation of the noise projection follows
Adaptive-weighted total variation minimization for sparse data toward low-dose x-ray computed tomography image reconstruction
doi: 10.1088/0031-9155/57/23/7923
and references in that work.
Source: MATLAB/Utilities/addCTnoise.m
im3DDenoise#
function [ imgO ] = im3DDenoise( img,type,varargin )
IMDENOISE3D removes noise of image with different methods
Currently only TV is supported. Input arguments are the image, the type
of denoising ('TV' only now) and the parameters for the denoising,
being number of iterations and hyperparameter currently available.
Source: MATLAB/Utilities/im3DDenoise.m
im2DDenoise#
function img = im2DDenoise(img, type, kernelsize)
img2DDenoise removes noise of image with 2D kernel-based methods
Currently only median and average filter is supported.
type: 'median' or 'average'
kernelsize: filter kernel size
Source: MATLAB/Utilities/im2DDenoise.m
im3Dnorm#
function n=im3Dnorm(img,normind,varargin)
IMAGE3DNORM computes the desired image norm
IMAGE3DNORM(IMG,NORMIND) computes the norm if image IMG using the norm
defined in NORMING
IMG A 3D image
NORMIND 'LN': N norm
'TV': TV norm
Source: MATLAB/Utilities/im3Dnorm.m
plotImg#
function plotImg(img,varargin)
PLOTIMG plots a 3D image in slices
PLOTIMG(IMG) plots 3D image IMG looping through X axis (first
dimension)
PLOTIMG(IMG,OPT,VAL,...) uses options and values for plotting. The
possible options in OPT are:
'Step': Sets the step size between slice and slice. Step is 1 by
default.
'Dim': Sets the dimensions in which the function iterates through.
Default is 1 or 'X', possibilities are 2,3 or 'Y','Z'
respectively.
'Savegif': With an string in VAL, saves the image as .gif with
VAL as filename
'Colormap': Sets the colormap. Possible values for VAL are the names of
the standard MATLAB colormaps, the names in the perceptually
uniform colormaps tool or a custom colormap, being this last
one a 3xN matrix. Default is GRAY
'Clims': a 2x1 matrix setting the upper and lower limits of the
colors. The default computes the lower and upper percentile
of data, in 1% and 99% and sets the limits to that.
'Slice' Plots a single slice of the data. Overwrites Step.
Source: MATLAB/Utilities/plotImg.m
plotProj#
function plotProj(proj,alpha,varargin)
PLOTPROJ plots the projection data
PLOTPROJ(PROJ,ALPHA) plots projection data PROJ over radians ALPHA,
where length(ALPHA) == size(PROJ,3)
PLOTPROJ(PROJ,ALPHA,OPTS,VAL,...) Allows user specified OPTS options
with corresponding VAL values.
Posible options in OPTS are:
'Colormap': Sets the colormap. Possible values for VAL are the names of
the standard MATLAB colormaps, the names in the perceptually
uniform colormaps tool or a custom colormap, being this last
one a 3xN matrix. Default is GRAY
'Clims': a 2x1 matrix setting the upper and lower limits of the
colors. The default is the limits of the data.
'Step': Sets the step size between slice and slice. Step is 1 by
default.
'Savegif': With an string in VAL, saves the image as .gif with
VAL as filename
'Slice' : Plot a single projection, given by index VAL. Should not be
used with 'Step',overwrites it.
Source: MATLAB/Utilities/plotProj.m
plotSinogram#
function plotSinogram(proj,alpha,varargin)
PLOTSINOGRAM plots the sinogram of the projection data
PLOTSINOGRAM(PROJ,ALPHA) plots the sinogram of projection data PROJ
over radians ALPHA, where length(ALPHA) == size(PROJ,3). This does the
same as PLOTPROJ, but with the input transposed and sliced along a
different axis: instead of showing, for each angle, the U-V detector
image, PLOTSINOGRAM shows, for each detector row (V), the U-angle
sinogram (i.e. the detector's horizontal readout stacked over all
acquisition angles).
PLOTSINOGRAM(PROJ,ALPHA,OPTS,VAL,...) Allows user specified OPTS options
with corresponding VAL values.
Posible options in OPTS are:
'Colormap': Sets the colormap. Possible values for VAL are the names of
the standard MATLAB colormaps, the names in the perceptually
uniform colormaps tool or a custom colormap, being this last
one a 3xN matrix. Default is GRAY
'Clims': a 2x1 matrix setting the upper and lower limits of the
colors. The default is the limits of the data.
'Step': Sets the step size between slice and slice. Step is 1 by
default.
'Savegif': With an string in VAL, saves the image as .gif with
VAL as filename
'Slice' : Plot a single sinogram (single detector row), given by
index VAL. Should not be used with 'Step', overwrites it.
Source: MATLAB/Utilities/plotSinogram.m
sheppLogan3D#
function [p,ellipse]= sheppLogan3D( sz,type )
SHEPPLOGAN3D(SIZE,TYPE) returns the shepp logan phantom, defined by size
SIZEand type :
'Shepp-Logan' A test image used widely by researchers in
tomography
'Modified Shepp-Logan' (default) A variant of the Shepp-Logan phantom
in which the contrast is improved for better
visual perception.
'yu-ye-wang' Another version of the modified Shepp-Logan
phantom from "Katsevich-Type Algorithms for
Variable Radius Spiral Cone-BeamCT"
Default values are 128^3 and 'Modified Shepp-Logan'
Source: MATLAB/Utilities/sheppLogan3D.m
cropCBCT#
function img=cropCBCT(img,geo)
cropCBCT(img,geo) will crop the parts of the image that will not have
clear information after the reconstruction. It sets to zero everything
outside the cylinder constrained in the image, and crops a small cone
shape on top and bottom of the image.
Source: MATLAB/Utilities/cropCBCT.m
out_of_FOV_mask#
function result = out_of_FOV_mask(img, geo, dia)
ROI_mask=Cylindrical Mask to Input image matrix
Date: 2015-10-22
Author: Yi Du (yi.du@hotmail.com)
Modified: Ander Biguri
Measure_Quality#
function [qualMeas]=Measure_Quality(res_prev,res,QualMeasOpts)
No help text.
GpuIds#
classdef GpuIds
GpuIds
Usage:
To select GPUIDs of 'GeForce RTX 2080 Ti',
gpuids = GpuIds('GeForce RTX 2080 Ti');
To select GPUIDs of all installed GPUs,
gpuids = GpuIds();
Source: MATLAB/Utilities/GPU/GpuIds.m
getGpuIds#
function gpuids = getGpuIds(gpuname)
No help text.
Source: MATLAB/Utilities/GPU/getGpuIds.m
getGpuNames#
function names = getGpuNames()
No help text.
citeme#
function citeme( func_name ,bib)
CITEME(FUCTIONAME) gives the bibliographic reference of the function being
used.
Source: MATLAB/Utilities/citeme.m